Display And Operating Elements; Menu Operation - Balluff BSP B Serie Manual De Instrucciones

BSP B/M/V _ _ _ - _ _ _ _ _ - P00S2B - S4(- _ _ _ )
Pressure Sensors with IO-Link

Display and operating elements

1 2 3 4
7
1 Four red LEDs for units selection (bar, mbar, PSI, MPa)
2 LED IO-Link (red): Status indicator for IO-Link
3 LED Out 1 (yellow): Status indicator for Switching Output 1
4 LED Out 2 (yellow): Status indicator for Switching Output 2
5 Red 7-segment display for measurement value and
parameters
6 Button for menu selection and confirming/entering
7 Button for moving within the menu
Fig. 14: Overview of display and operating elements
Status LED
for IO-Link active (Master-Slave mode)
LED IO-Link
IO-Link inactive (Master-Slave
(red)
off
mode)
Switchpoint 1 reached, switching
for
LED Out 1
output active
(yellow)
off Switchpoint not reached
Switchpoint 2 reached, switching
for
LED Out 2
output active
(green)
off Switchpoint not reached
Button functions
Short press
Long press
Short press
Long press
Hold down
both buttons
simultaneously
The pressure sensor is configured according to
VDMA 24574-1.
10 english
5
6
Scroll from Menu 1 to
Menu 5, then return to
display.
Quickly increment para-
meter values.
Select menu item within a
menu.
Apply set parameters and
jump to current menu
item.
Jump back to display.

Menu operation

Example using menu items 1 to 5:
1. Press to open Menu 1.
2. Press
to display the values for Switchpoint 1. The
selected value flashes.
3. Press
to select a value. Press
selected value and return to Menu 1.
4. Press
to open the next menu and set the value as
described under 2 and 3.
5. Press to open Menu 5.
6. Press to open the first submenu 5/1 and set the
value as described under 2 and 3.
Hold down both buttons to exit the menu.
If no button is pressed within 60 sec., the
program returns to the display without saving
the changed value.
to confirm the