PARTS
1.
Grill
2.
Nut
3.
Fan blades
4.
Large nut
5.
Rear grill
6.
Motor
7.
Two-piece tube
8.
Base
9.
Oscillation button
10. Knob for setting speed
BEFORE THE FIRST USE
To mount the fan, follow these steps:
1.
Place the rear grill on the motor, making sure that the groove in the grill corresponds to the tongue
on the motor.
2.
Tighten the grill with the large nut.
3.
Place the fan blades on top of the unit so that the groove in the fan blades corresponds to the
tongue on the motor.
4.
Tighten the fan blades with the nut.
5.
Place the grill on the fan so that the grill clicks over the rear grill. Screw the unit into place using the
small screw at the bottom of the grill.
20
DO8150
3
1
2
7
8
5
4
6
9
10