Nosepiece Table - Rivets Per Battery Charge; Safety Instructions - Gesipa AccuBird Instrucciones De Manejo

1.4. Nosepiece table – Rivets per battery charge
Blind Rivet-Ø Rivet dia. Rivet
in mm inch
2,4 3/32''
3,0 a.3,2 1/8''
3,0 a.3,2 1/8''
3,0 a.3,2 1/8''
4,0 5/32''
4,0 5/32''
4,0 5/32''
4,8 a.5,0 3/16''
4,8 a.5,0 3/16''
4,8 a.5,0 3/16''
* available as special accessories.
Elongated nosepieces and other special nosepieces are available upon request.
BULB-TITE ® Rivet-Ø Rivet body
mm Type material
4,0 RV 6602-5- All Alum
RV 6604-5-
5,2 RV 6601-6- All Alum
RV 6602-6-
RV 6604-6-
RV 6606-6-
6,3 RV 6601-8- All Alum
RV 6604-8-
RV 6606-8-
6,3 RV 6671-8- Steel/Steel
RV 6676-8-
** available as special accessories.

1.5. Safety instructions

Blind rivet setting tool AccuBird
Caution:
Following safety rules must be followed
for adequate protection against electrical schock,
injuries or fire hazards:
•
The riveting tool should be used exclusively
to set blind rivets.
•
Do not overload the tool; Work within the
prescribed work capacity.
•
Do not expose the tool to humidity or rain,
do not operate the tool close to inflammable
substances or gases: Risk of explosion!
10
Standard Nosepieces
Rivets/
body material Charge
Alum 1.900
Alum 1.300
Steel 1.100
Stainless Steel 1.000
Alum 1.000
Steel 900
Stainless Steel 800
Alum 700
Steel 500
Stainless Steel 400
Rivets/ Nose-
Charge piece
1.000 17/26 BT** 725 2202
800 17/32 BT** 725 2210
600 17/42 BT** 725 2229
300 17/42 BT** 725 2229
Also available as a complete set (# 50) part no. 725 9290.
®
Nose- Part.
piece No.
17/18* 725 2075
17/24* 725 1583
17/24* 725 1583
17/24* 725 1583
17/24* 725 1583
17/27* 725 2040
17/29* 725 2059
17/29* 725 2059
17/32* 725 2067
17/36* 725 2083
Part. Jaw
No. Pusher BT
–
–
54**
54**
•
Ensure that the battery is properly secured in
the tool handgrip.
•
Remove the battery when the tool is not in use
and for repair/servicing operations.
•
Do not use the tool as a hammer.
•
When not in use, keep the tool in a dry closed
room, out of reach of children.
•
When working with the tool, always carry
protection goggles. Personal protection like
clothes, gloves, safety helmet, non slipping
shoes, ear protectors and protection against
fall are highly recommended.
Retaining Nosepieces
Nose-
piece
17/18 R* 725 4078
17/24 R* 725 4086
17/24 R* 725 4086
17/24 R* 725 4086
17/24 R* 725 4086
17/27 R* 725 4094
17/29 R* 725 4108
17/29 R* 725 4108
17/32 R* 725 4116
17/36 R* 725 4124
Part. Jaws
No. BT
– –
– –
725 2245 55** 715 1527
725 2245 55** 715 1527
Part.
No.
Part.
No.
–
–