Camera Mounting; Mount On Dual Track System; Mount Using The Thread Mount - Midland XTC 270 Manual De Instrucciones

Camera Mounting

Mount on Dual Track System

The XTC-270 was innovatively designed with an
identical dual track mount system on either side of
the camera. This allows an ease of installation. To
mount the camera on the dual track mount, slide
the camera onto the dual track system with the
two notches on the mount facing towards the back
of the camera.
To detach the camera from the dual track mount,
hold the camera with the lens facing away from
you. Press down the mount release switch and pull
the mount towards yourself.
The dual track mount allows the camera to be ea-
sily mounted on the helmet mount and on all other optional accessories with same type of slides. When mounting the camera on the
dual track mount, you must do the following:
1. Consider what you would like to shoot and use the helmet mount or goggle mount accordingly.
2. Ensure, once attached, that the camera is aimed straight and not towards the ground or at the sky.

Mount using the Thread Mount

On the bottom of the XTC-270 there is a stan-
dard thread mount that allows the camera to be
mounted on optional accessories that has standard
camera screw.
To fix the camera, insert the screw on the mount
into the camera thread and rotate the camera
clockwise to tighten down onto the screw.
When mounting the camera on the handlebars of a
bike or with the vented helmet strap mount follow
these steps:
1. Consider what you would like to shoot and
mount accordingly.
2. Ensure, once attached, that the camera is aimed straight and not towards the ground or at the sky.
Helmet adhesive mount
Camera thread
Helmet strap mount
dual track system mount
Release button
Goggle mount
Mounting screw
Bicycle handle bar mount
15