The Control Panel; Status Indicator Light - Lotus 14005R4 Manual De Uso

UNDERSTANDING YOUR WATER TREATMENT SYSTEM

THE CONTROL PANEL:

Water Treatment System. (FIGURE 4)
A. PROCESS Button
B. MANUAL DISPENSE Button
C. STATUS INDICATOR Light
C
B
A. PROCESS Button:
A
green light indicates that the process has begun. You should see a uniform dispersion
of bubbles in the Processing Carafe. When the light goes off the process is complete.
FIGURE 4
(FIGURE 5).
B. MANUAL DISPENSE Button:
dispense Button will light up green. This signals that treated water is ready to be
dispensed, (manually or automatically) through the carbon-block filter
(FIGURE 6).
C. STATUS INDICATOR Light:
1.
or well water.* (FIGURE 7)
FIGURE 5
2.
FIGURE 6
The control panel also communicates other important information.
See "troubleshooting" Page.10
*Tested and verified by independent laboratory testing for the bacterial and protozoa
claims on the Performance Data List on page 16. NSF Certification for a microbiological
FIGURE 7
claim is for Cyst Reduction only.
Pushing this button starts the ozonation process. The
This indicates whether the system is programmed for municipal water, lake water
• No green light: This means the system is set for municipal water.
• Solid green light: It indicates you have programmed your lotus® Water Treatment
System for lake or well water.*
• Flashing green light: It indicates that the unit is in the programming mode,
which allows you to change from municipal water to lake or well water.*
• Must be used with microbiologically safe water!
Your Water Treatment System can be used with various water
sources including: municipal, lake or well water.* Depending on the
source you may need to program the system for the appropriate mode.
The unit is pre-programmed for municipal water.
This light also indicates when the filter needs replacing.
• Slow flashing amber light: There are about one hundred (or fewer) processing
cycles left on the carbon-block filter.
• Fast flashing amber light: There are about fifty (or fewer) processing cycles left on
the carbon-block filter.
• Solid amber light: The carbon-block filter must be changed. The unit will not
process any more water until the filter has been replaced.
4
This is the interactive information center of your
After the process light goes off, the manual