Dentatus ARH2 Instrucciones De Uso página 4

Dentatus articulators ARH2 & ARH2/J, descriptions
see illustrations on cover, fig 1 (left)
1. Set Screw for Horizontal Condylar
Inclination (HCI)
2. Condylar Track
3. Lock Screw for Condylar Sphere
4. Condylar Sphere
5. Auditory Pin
6. Condylar Axis with Axis Pin
7. Centerpunched Calibrated Condylar
Axis Pin
8. Condylar Track Assembly
9. HCI Calibration Scale
10. Larger Anterior Stop Screw for
Condylar Sphere
11. Smaller Anterior Stop Screw for
Condylar Sphere
12. Condylar Assembly Holder
13. Condylar Post
14. Transport Safety Post
(Locking Column)*
15. Lock Nut for Bennett-Angle Setting
16. Lower Jaw Member
17. Posterior Positioning Pin for Mounting
Plate
18. Attachment Screw for Lower Mounting
Plate
* The locking column (14) with ARH2 and
ARH2/J is a protective device and should
be in place during transport. Casts should
be detached and wrapped separately during
transport.
19. Anterior Positioning Pin for Mounting
Plate
20. Incisal Table Groove for Positioning of
Individual Anterior Guidance
21. Lock Screw for Incisal Table angulation
22. Calibration for Incisal Table
(Setting is engraved on opposite side)
23. Solid Detachable Incisal Table
24. Incisal Groove
25. Calibrated Curved Incisal Pin
26. Lock Screw for Incisal Pin
27. Incisal Pin Calibration Scale
28. Support Rod for Upper Jaw Member
29. Lock Nut for Orbital Axis Plane
Indicator
30. Orbital Axis Plane Indicator
31. Sideshift setting thumbwheel
31a. ARH2 with Sideshift
31b. ARH2/J without Sideshift
32. Attachment Screw for Upper
Mounting Plate
33. Bennett-Angle Calibration Scale
2