visomat comfort II Manual De Instrucciones página 31

Brief instructions for use
3. Pumping up the cuff
Press the "Start" button.
The machine will carry out a function test,
and all display elements will be visible
The cuff will be pumped up automatically
to about 180 mmHg. If the pressure in
the cuff is still too low, the machine will
continue to pump it up in steps of about
30 mmHg at a time.
4. Blood pressure measurement
After inflation, the cuff deflates automati-
cally, the falling pressure in the cuff will be
shown automatically, and the „❤" symbol
will flash and beep as soon as the instru-
ment has registered the pulse.
The automatic release of the air from the
cuff will show the end of the measuring
cycle.
B
GB-31