Chauvin Arnoux Statop 4849 Manual De Instrucciones página 40

ON-OFF :
Cycle time :
Control action :
OUTPUTS
Relay :
Logic voltage :
Soft start :
Current :
Alarm :
Timer :
ADJUSTMENTS
Setpoint :
Alarm :
Manual reset (offset) :
C/F display :
Resolution :
Hysteresis :
DISPLAY
Process display :
Setpoint display :
Mode indicators :
POWER REQUIREMENT
Rating :
Consumption :
ENVIRONMENTAL & PHYSICAL
Operating temperature :
Humidity :
Insulation :
Breakdown :
Vibration :
Shock :
Dimensions (mm) :
Depth from behind flange : 86 mm
Weight :
Watertightness :
With adjustable hysteresis
0...120 seconds
Configurable for Direct (Cooling) or Reverse (Heat)
SPDT 3A/240 VAC maximum, resistive load.
24V, 20 mA max.
Ramp to setpoint at power on.
4...20 mA (0...20mA) maximum load 500 Ω
N.O. contact 2 A/240 VAC maximum, resistive load
Alarm configurable as soak timer
Full range adjustable.
Full range adjustable.
0 to Pb x SPAN/100.
Configurable.
Configurable.
0...20.0% of SPAN.
10 mm red LED, full 4 digits.
8 mm green LED, full 4 digits.
red LED for alarm output indication.
green LED for control output indication.
90...260 V AC 50/60 Hz
5 VA.
-10...50°C.
0...90% RH non condensing.
20 MΩ minimum, 500 V DC.
2000 V AC, 50/60 Hz, 1 minute.
10...55 Hz 1 mm amplitude.
20 g
n
48 x 48 x 94
250 grams
IP 54 (front), IP 20 (case)
40