sanindusa 541057111 Instrucciones De Montaje página 45

Adjusting the settings with the remote control
If necessary, the sensor settings can be adjusted as following:
adjust the sensor with the remote control, hold the remote control straight in front of the sensor in a
distance of about 6-8" (15-20cm). Choose the function you want to adjust by pressing once on one of
the function buttons. After pressing once on a specific function button, a quick flashing of the LED at
the front of the sensor will occur. At this stage, you can change the setting by pressing the (+) or the (-)
buttons, every push will increase or decrease one level. After finishing the adjustment, turn the water
supply back on.
Detection Range
Only if necessary, use the remote control to adjust the sensor range as follows:
RANGE button. Wait until a quick flashing of the LED in the sensor eye is perceived. Then, press
(+) to increase the one level and (-) to reduce it every push will increase or decrease one level.
NOTE: Once you have changed the detection range with the remote control, this distance will
be remembered by the sensor, even if the power source is disconnected.
Delay In Time
If required, the delay in time can also be modified as follows:
quick flashing of the LED in the sensor eye is perceived. Then, press (+) to increase the delay in
time and (-) to reduce it.
Delay Out Time:
This button allows modifying the flushing start time after the user moves away from the
product. A delay out time close to 0 will save more water. An increased delay out time will make
the user experience more comfortable.
If required, the delay out time can be modified as follows:
quick flashing of the LED in the sensor eye is perceived. Then, press (+) to increase the delay
out time and (-) to reduce it.
Temporary Off Function
This function is ideal to perform any kind of activity in front of the sensor without operating
the system (for example, cleaning).
The product will remain shut for 1 minute when this button is pressed once. To cancel this
function and to return to normal operation press the On/Off button again or wait 1 minute.
//SETTINGS ADJUSTMENT
Shut off the water supply. In order to
Press the IN button. Wait until a
Press the OUT button. Wait until a
Press the