sanindusa 541057111 Instrucciones De Montaje página 46

//SETTINGS ADJUSTMENT
Reset button
This function restores all the factory settings except for the sensor range.
If required, press the Reset button and without releasing it, press the + button once.
Security time
The Security time, prevents continuous flushing of water due to reflections or vandalism. By
default, if the sensor is covered for more than 90 seconds the water flow will shut automati-
cally. To resume regular operation any obstruction must be removed.
Press the SEC button. Wait until a quick flashing of the LED of the sensor eye is perceived.
Then, press (+) to increase the security time and (-) to reduce it.
24 hour hygiene flush
This model includes a 24 hours hygiene flush which is disabled. To activate the hygiene flush,
press the clock button. Wait until a quick flashing of the LED in the sensor eye is perceived.
Then press (+) to activate the hygiene flush. To disable it again, press (-) to deactivate it.
Comfort flush
If your model includes a Comfort flush setting, it can be activated by pressing the flush button.
When the button is pressed, one blink of the LED in the sensor eye is perceived. The pre-pro-
grammed flush cycle will take place then.
The Comfort flush cannot be interrupted or deactivated by pressing any button until it is over.
46 47
//