Tips And Precautions For Charging Your Battery - Crosscall CORE-T4 Manual De Instrucciones

icon battery saver.
To disable this mode, press the same icon again. If you hold down this icon for a few
seconds, you will see information about your battery status.

Tips and precautions for charging your battery

The battery is built into the tablet and is not removable. Do not remove the battery
yourself.
• Use only approved chargers, batteries and cables. Using unapproved chargers or cables
may cause the battery to explode or damage the tablet.
• Avoid using your tablet while charging. Do not cover your tablet or the power adapter.
• Incorrect charger connection could seriously damage your tablet. Any damage caused
by misuse is not covered by the warranty.
• If the AC power is lower, your tablet may take longer to charge.
• If you use unconventional chargers such as computers, the charging time may be longer.
• Please charge the battery before using the tablet for the first time and unplug the
charger immediately after the first charge is complete.
• Remove the charger from the electrical outlet when the tablet is not charging.
• The tablet may not switch on straight away if you are charging a drained battery. Once
the tablet has been charging for a while, the tablet will start normally.
• The charging time may vary depending on the ambient temperature and the remaining
battery level.
• The tablet can be safely charged at a temperature between 0°C and 40°C. Charging
at temperatures below 0°C or above 40°C may adversely affect battery performance
and reduce battery life. Long-term charging at extreme temperatures will damage the
battery.
• During charging, the tablet and charger may become hot.
This is completely normal and should not affect the life or performance of the tablet. If
the battery seems hotter than usual, stop charging it. Put your tablet in a cool place and
leave it to cool. Avoid prolonged contact with the surface of your tablet when it is hot.
The device's features may vary depending on your location, language, operator
and model. This device is OTG compatible. Please use a standard OTG cable.
50