PARTS
1.
Air outlet
2.
Controller
3.
Air inlet
4.
Lighting
5.
Filter
6.
Base
CONTROLLER
7.
Indicator lights
8.
Speed control
9.
On/off switch for lighting + reset
switch for filter
10. On/off switch
USE
ON/OFF SWITCH
Plug the power cord into a socket. Switch on the air purifier using the on/off switch. The device will begin
to work at low speed.
SPEED CONTROL FAN
Control the speed with the speed control. The corresponding indicator light comes on:
·
S: sleep mode - low speed, indicator lights and lighting are dimmed
·
1: low speed
·
2: middle speed
·
3: high speed
LIGHTING
The device mood lighting switches on and off alternately. Using the lighting on/off switch, you can
switch off the lighting and the indicator lights. The device will continue to work at the previously selected
settings. Only the on/off switch indicator light will light up softly.
FILTER
After 2,000 hours of use, the filter reset switch indicator light will start to flash. Replace the filter, see
"cleaning and maintenance > filter". Hold the switch for 5 seconds to reset the switch. The counter will
start running again.
www.domo-elektro.be
1
2
3
3
4
5
6
3
7
8
9
10
17
DO264AP