Kratki ARKE Serie Manual Del Usuario página 23

2 – the turbines operate continuously at reduced speed regardless of the cassette operation,
3 – the turbines operate continuously at full speed regardless of the cassette operation.
Electrical connections are made by means of high-temperature conductors, which ensure an adequate
level of safety.
Kratki.pl recommends to set the switch to (1) when firing in the cassette due to the location of the
sensor (temp 50°C is obtained only during intense firing). The cassette must not be operated without
power supply. (Figure 2)
The electrical installation is protected against the effects of a short circuit by a 630 mA tube fuse.
The fuse is installed in the socket under the cover.
To remove this element - unscrew the plastic plug of the fuse holder by turning it counter-clockwise.
NOTE!!!
To dismantle the turbine, first remove the plug from the socket.
PARAMETERS
General characteristics
NOMINAL POWER
POWER RANGE
FLUE DIAMETER
THERMAL EFFICIENCY
CO EMISSION (at 13%
O2)
DUST EMISSION
WEIGHT
No hazardous substances. No part of the fireplace contains asbestos. The manufacture process
makes use of no cadmium nor any heavy metals.
ARKE 70 ARKE 75
8 kW
3,5 - 10 kW 4 - 11 kW
150
84 %
0,09 % 0,10 %
39 mg/Nm 39 mg/Nm
3
110
ARKE 80
8 kW 12 kW
6 - 16 kW
150 200
83 % 75 %
0,10 %
34 mg/Nm
3
115 132
ARKE 95
14 kW
6 - 16,5 kW
200
83 %
0,10 %
38 mg/Nm
3 3
154
23