Unpacking; Disposal Of The Packaging; Setup; Setup Location Requirements - CASO DESIGN TeeGourmet Manual Del Usuario

Tabla de contenido

Idiomas disponibles

14.3 Unpacking

To unpack the device, proceed as follows:

 Remove the device out of the carton and remove the packaging material.

The packaging protects the device against damages during transit. The packaging

materials are selected in accordance with environmentally compatible and recycling-

related points of view and can therefore be recycled.

Returning the packaging back to the material loop saves raw materials and reduces the

quantities of accumulated waste. Take any packaging materials that are no longer required

to "Green Dot" recycling collection points for disposal.

► If possible, keep the original packaging for the device for the duration of the guarantee

period of the device, in order that the device can be re-packaged properly in the event

of a guarantee claim.

14.5.1

In order to ensure the safe and trouble-free operation of the device, the setup location

must fulfil the following prerequisites:

 The device must be set up on a firm, flat, horizontal surface with sufficient load-bearing

capacity for the teamaker.

 Choose the setup location in such a way that children cannot reach any hot surfaces on

the device.

 Do not set up the device in a hot, wet or extremely damp environment or near

flammable material.

 The electrical socket must be easily accessible so that the power lead can be

disconnected easily, in the case of an emergency.

 The installation and assembly of this device in non-stationary setup locations (e.g. on

ships) must be carried out by specialist companies / electricians, provided they

guarantee the prerequisites for the safe use of this device.

► The device can only be operated with teapot and filter pot.

Please note

Tabla de Contenido

Tabla de contenido