Overview Of The Components / Delivery Scope; Before Use; Attaching Accessories; Function And Accessories - Profi Cook PC-SMS 1095 Instrucciones De Servicio

Overview of the Components /
Delivery scope
1 Rotary speed control
2 Push button
3 TURBO button
4 Motor casing
5 Mixing rod, removable
6 Adapter for whisk
7 Whisk
8 Lid of the chopping machine
9 Multi-purpose blade (2 parts)
10 Transparent beaker (for the chopper)

Before Use

1. Take out all the parts carefully out of the pack-
ing.
2. Check the delivery scope for completeness.
3. Check the device for potential transport dam-
age in order to avoid hazards.
NOTE:
In case of transport damage, contact your
dealer immediately. Do not operate a dam-
aged device!
4. Clean the device before using it for the first
time as described in "Cleaning".

Attaching Accessories

Refer to the pictures on page 3 when assembling
the product.
Attaching the Mixing Rod (Fig. A)
1. Place the motor housing (4) on the mixing rod
(5).
2. Tighten the motor housing in a clockwise
direction by turning it as far as it will go. The
and symbols must be aligned on top of each
other. Check that it is tight.
Remove the Mixing Rod
Remove the mixing rod from the motor housing by
turning it briefly in an anticlockwise direction.
Whisk (Fig. B)
If you would like to use the whisk (7), replace the
mixing rod by the adapter (6).
1. Lock the whisk into place by applying moderate
pressure to the driveshaft of the adapter.
2. Place the motor housing (4) on the adapter (6).
3. Tighten the motor housing in a clockwise
direction by turning it as far as it will go. The
and symbols must be aligned on top of each
other. Check that it is tight.
Dicer (Fig. C)
WARNING:
The multi-blade is very sharp! Danger of injury!
NOTE:
• Always insert the knife into the container first
and only then add the foodstuff.
• The bolt at the bottom of the container guides
the knife.
• Using one or both knives will depend on the
amount and texture of your food.
1. If you want to use both knives, place the knife
on the ring onto the shaft of the other knife.
Use the recesses inside the ring and the guide
lugs on the shaft as a guide.
2. Place the knife with the shaft onto the bolt at
the bottom of the container.
3. Close the container with the lid (8). Use the
locking pins on the lid and the guides on the
container. Turn the lid clockwise to its limit.
4. Place the motor housing in position and lock it
into place by turning in a clockwise direction.
The and symbols must be aligned on top
of each other. Check that it is tight.

Function and Accessories

Instructions
• The appliance is designed for the mashing and
mixing of food and drinks and for chopping
together with the multi-chopper.
43