Sony PlayStation 2 Manual De Instrucciones página 10

10
Connecting your console to a TV set
You can connect the PlayStation 2 console to most TVs or VCRs using the supplied AV cable
®
(integrated audio/video) as described below. The console can also be connected to other types of TVs
using specialized cables and adaptors, which are sold separately. For details, see the following
sections:
•Connecting to a TV with an S VIDEO input connector (this page)
•Connecting to a TV with an antenna input (this page)
•Connecting to a TV with component video input connectors (page 11)
The instructions in the above sections assume audio output through TV speakers.
Caution
For safety reasons, turn off the console and remove the power plug from the electrical outlet before making or adjusting
connections.
Note
If the picture quality is reduced when using progressive scan with a TV that supports progressive scan, try viewing in
standard interlace mode. For details on progressive mode, see "Progressive" on page 28.
Connecting to a TV with audio/video inputs
Connect your PlayStation 2 console to the TV using the supplied AV cable (integrated audio/video).
®
When connecting, match the color-coded cords to the appropriate jacks on the components: yellow
(video) to yellow, red (right audio) to red and white (left audio) to white.
After connecting
Set your TV to the appropriate video input mode. Refer to the instruction manual supplied with your
TV for details.
When connecting to a wide screen TV (16:9 aspect ratio)
Set "Screen Size" in the System Configuration menu to "16:9." For details on the System
Configuration menu, see pages 14-15.
If your TV is monaural
Do not connect the red plug. If you want to hear both left and right sounds from a monaural TV, use a commercially
available dual phono to single phono (stereo to monaural) type audio cable (sold separately).
To video input
To audio input
(left)
To audio input
(right)
AV cable (integrated audio/video)
DIGITAL OUT (OPTICAL)
connector
AV MULTI OUT
connector
AC power cord
Connecting to a VCR
Connect your PlayStation
using the supplied AV cable (integrated audio/
video) matching the plug colors.
If your VCR is monaural, do not connect the
red plug.
However, when playing a DVD video, do not
connect the console to a VCR. If you do,
picture quality may be reduced. Connect the
console directly to the TV.
After connecting
Set your TV and VCR adjustments
appropriately.
Refer to the instruction manuals supplied with
your TV and VCR for details.
Connecting to a TV with an S VIDEO input connector
Connect your PlayStation
S VIDEO input connector on the TV using the
SCPH-10060 U S VIDEO cable (sold separately).
You will get a better picture than when using
the AV cable (integrated audio/video).
After connecting
Set your TV to the appropriate video input
mode (such as "S VIDEO").
Connecting to a TV with an antenna input
Connect your PlayStation
MAIN POWER
antenna input on the TV using the SCPH-10071
switch
RFU adaptor (sold separately). In this case, the
sound is monaural.
~ AC IN connector
After connecting
Set the channel switch on the RFU adaptor and
the channel selector of your TV to VHF channel
CH 3 or CH 4, whichever is not active in your
area.
2 console to the VCR
®
When playing a DVD video
PlayStation
console
2 console to the
®
To S VIDEO
input
To audio input
(left)
2 console to the
®
To antenna
input
VCR
Connect directly
2
®
TV
To AV MULTI OUT
connector
To audio input
(right)
To AV MULTI OUT
connector