Read and ensure you
have fully understood
this manual before
starting the device or
performing any
maintenance on the
compressor
Danger: hot surface
Class 3 appliance
Warning
Before starting the compressor, carefully read the manual. Keep
this manual for future reference.
Warning
Improper use of the compressor risks causing substantial damage or
injuring the user. While using the compressor, ensure that the bike or
vehicle is parked in a safe location, off the road, that its handbrake is
applied, and that your personal safety is not at risk.
Levelling
The compressor must be installed on a horizontal plane (maximum
allowable inclination of 21°).
Power supply
Power required: 12 volts DC.
Replacing the fuse
The fuse is located inside the casing found on the power supply
cable. Remove the lid and retrieve the damaged 15A fuse. Replace
the fuse with another fuse that has the same power specifications.
EN
It is mandatory to wear
noise-reducing ear
protection during
operation to limit the
noise level
Conforms to
appropriate safety
standards
48