24
24
electr
electr
olux
olux
24
24
24
electr
electrolux
electr
olux installation
olux
• Install the structure to the ceiling,
onto the 4 pre-tightened screws and
GB
then screw them in firmly.
• Fix it in place using 2 screws.
For the r
For the r
ecir
ecir
• For the r
For the r
For the recir
ecir
ecirculation mode only:
assemble the three parts of the
deflector (central part + 2 extensions)
using 2 screws so that once
assembled, the deflector is the same
width as the structural support.
Fasten the deflector inside the
structural support using 4 screws.
Fit an exhaust tube to the deflector
connection ring. The tube must be
300 mm shorter in length than the
structural support (please refer to
measurement E E E E E calculated
previously).
• Connect the exhaust tube to the
connection ring above the cooker
hood.
• Carry out the necessary electrical
connection.
culation mode only:
culation mode only:
culation mode only:
culation mode only:
2 x
Ø6 x 70
X 4!
F