Special Functions - Enviro MRP2 Manual De Uso

: Holiday period programme
Example:
On CH1 you have a programme which switches to ON every day at 10:00 and turns OFF at 12:00.

If the display shows , the channel switch will be ON between 10:00 and 12:00 and otherwise OFF.
If the display shows [ON] or [OFF], it will be permanently ON or OFF regardless of the programming.

If it shows + OFF and the
command is reached inside the programme.
On the other hand, if the display shows
until the next ON or OFF command is reached inside the programme.
Reading the stored commands
Successively pressing the "Prog"
memory position is shown. At last, the display will indicate the number of free memory positions available. If the memory is full, the
display shows "FR00".
Manual activation of the switches
Using the buttons with the hand symbol ("
Pressing once: Toggles the switch position. If it was ON, it will change to OFF and vice versa. When set in this position, the

programmed events will not take place until the next command is reached.
Pressing twice: The switch contact gets locked in the [ON] position permanently. The programmed events will not take place.

Pressing three times: The switch contact gets locked in the [OFF] position permanently. The programmed events will not take

place.
Pressing once again: Returns to normal operation mode (automatic programme


Special functions

AM/PM display
Pressing both "±1h" and "h+" buttons simultaneously toggles between AM and PM time display modes.
Selecting Summer or Winter time mode
Manual selection:
Changing from Winter to Summer time: Press the ±1h button. The display shows the Summer symbol.
Changing from Summer to Winter time: Press the ±1h button. The Summer symbol disappears.
Automatic selection: Three different alternatives are possible.
AU (Automatic)

The time change is performed according to an established calendar defined up to the year 2079. (EU and Switzerland Summer
/Winter time standard)
Beginning of summer time: Always the last Saturday of March, shifting from 2:00h to 3:00h.
End of summer time: Always the last Saturday of October, shifting from 3:00h to 2:00h.
cHA (Semiautomatic calculation) Freely selected change referenced to weekday

The Summer time period beginning day and end day can be entered. The programme automatically assigns these dates to the
correct weekday and month. During the following years, the time changes will occur at the same dates.
MRP2
4/7
button on Channel 1 is pressed, the display will show

+ ON and the
button shows the stored entries on the display one by one. After the last entry, the first empty
"), following actions can be accomplished:
button on Channel 1 is pressed, the display will show

)
www.audiovias.com
+ ON, i.e. ON until the next ON or OFF
+ OFF, i.e. OFF
50.0048.0200