Work Pro BlueLine Digital M Guía Rápida página 8

EN
BLC 1
- BLC 1 is a zone control for the receivers.
- It can control the audio input source
- It can control de audio level
- It adds an auxiliar input through minijack
- It has a Remote port to connect a receiver
- The maximum distance between BLC 1 and the BLR must be 5 m
WNC 1
- WNC 1 is a zone control for the receivers.
- It can control the audio input source
- It can control de audio level
- It is an IP devices, therefore, it must be connect to LAN directly.
- Is necessary to be configured through WorkCAD software in order to assign the receiver to control.
- Can be installed in any point, independently of the receiver position.
BlueLine System
OTHER DEVICES
Channel selection
indicator
Channel selection
pushbutton
Auxiliar audio input
86 x 86 x 45 mm
110 g
State
indicator
State selector
State selector
- 7 - Quick Reference / Guía rápida
86 x 86 x 45 mm
110 g
Audio level indicator
Audio level
adjustment pushbutton
Volume indicator
Increase volume
Reduce volume