Care And Maintenance; Care Of The Wood Panel And Dust Cover - 1 BY ONE 471NA-0002 Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 18
EN
DE
FR
ES
JP
IMPORTANT!
IT
TRANSPORTING THE SYSTEM
1. To protect the turntable from damage during transportation, a silver transit
screw is located on the upper right of the turntable platform.
2. Before playing, please use a screwdriver to turn the transit screw in a clockwise
direction (screw going down) completely to unlock the turntable.
3. To lock the turntable again for transportation, please turn screw in
a counter-clockwise direction.

CARE OF THE WOOD PANEL AND DUST COVER

1. Care of the turntable is the same as any piece of of furniture.
2. When the dust cover is dusty, you may wipe it using a soft, non-abrasive dust cloth.
3. If the wood panel becomes smudged with fingerprints, you may use any good
quality commercial dusting and polishing spray cleaner.
4. We recommend spraying the cleaner on a cloth, not directly on the
wooden panel.
08

CARE AND MAINTENANCE

TO REPLACE THE CARTRIDGE FROM THE TONE ARM PLEASE FOLLOW
THE PROCEDUCE BELOW.
1. Gently lift off the tone arm from the tone arm lock.
2. Use your left hand to hold the tone arm and your right hand to hold
the rear portion of the cartridge. Then push the cartridge backwards and
downwards according to the direction as shown to separate the cartridge from
the tone arm.
3. Using either a tweezer or your fingers, carefully unplug the terminals to the
new cartridge.
4. Carefully connect the terminals to the new cartridge (not included).
5. To re-install the new cartridge to the tone arm, first lock the front end of
the new cartridge on the hook of the tone arm.
6. Press the rear side of the new cartridge upwards to lock it on the tone arm.
CAUTION:
Please do not damage the stylus when installing the new cartridge.
09
EN
DE
FR
ES
JP
IT

Publicidad

Tabla de contenido
loading

Tabla de contenido