Sw Information And Update - LU-VE Emeritus LU1W Manual De Usuario

The ADVANCED → INFO screen shows the main unit configuration parameters, the version of the installed controller
software, and the hardware of the controller itself.
In the event of a subsequent release of the adjustment software, the new version is easily installed on the LU1W
controller.
To upload the new version:
-
copy the two executable files work.ucjb and work.ucje (received from LU-VE) into the root directory of an
empty USB key (recommended maximum 4GB).
-
Put the controller in standby mode.
-
Insert the USB key into the dedicated port. If the version of the executable does not match that of the
previously installed adjustment software, the controller downloads and installs the files automatically.
-
The operation is terminated once the controller restarts automatically, and the first screen (wizard screen, or
home page if the wizard is already successful) appears on the display. Then remove the USB key.
LU1W - User Manual

17 SW INFORMATION AND UPDATE

108 REV.1.1 – 07/11/2017 - ENG