Lubrication; Cables; Machine Storage; Service And Repair - RIDGID K-7500 Manual Del Usuario

K-7500 Drain Cleaning Machine

Lubrication

Grease all exposed, moving and rotating parts as re-
quired.

Cables

Drain drum after every use. Flush drum periodically, re-
move sediment that can corrode cable.
Cables should be thoroughly flushed with water to prevent
damaging effects of drain cleaning compounds. Periodi -
cally lubricate cables and couplings with RIDGID Cable
Rust Inhibitor.
When not in use, store cables indoors to prevent deteri-
oration by the elements.
Cables should be replaced when the become severely
corroded or worn. A worn cable can be identified when
outside coils of cable become flat.

Machine Storage

WARNING Motor-driven equipment must be kept
indoors or well covered in rainy weather. Store the ma-
chine in a locked area that is out of reach of children
and people unfamiliar with drain cleaners. This machine
can cause serious injury in the hands of untrained users.

Service and Repair

WARNING
Other service and repair work on this Drain Cleaner must
be performed only by qualified repair personnel. Drain
Cleaner should be taken to a RIDGID Authorized Service
Center or returned to the factory. When servicing this
machine, only identical replacement parts should be
used. Failure to follow these steps may create a risk of
electrical shock or other serious injury.
For information on your nearest RIDGID
Service Center or any service or repair questions:
• Contact your local RIDGID distributor.
• Visit www.RIDGID.com or www.RIDGID.eu to find
your local RIDGID contact point.
• Contact Ridge Tool Technical Service Department at
rtctechservices@emerson.com or in the U.S. and
Canada call (800) 519-3456
16
Independent
®