TFA_No. 60.2023_Anleitung_05_20
20.05.2020
MOODLIGHT – Light alarm clock with nature sounds and colour changing mood light
• Once the setting is confirmed, the NAP function is activated and the time display counts down the seconds.
• An alarm tone will sound when the set minutes expire.
• NAP 0:00 will be flashing on the display.
• Press any button and the nap function will stop.
• To activate the nap function with the last set nap time just press the NAP button in normal mode.
8. Backlight
8.1 LCD Backlight
• Press the SNOOZE/LIGHT sensor button to adjust the brightness - 4 levels (BACKLIGHT 1-4) or to switch it off.
8.2 MOOD LIGHT mode
• Press the MOOD LIGHT button in normal mode.
• LIGHT 1 (default) appears on the display and the mood light glows red.
• Press the MOOD LIGHT button to adjust the brightness - 4 levels or to switch it off.
• When the light is on, press the COLOR MODE button to choose between 7 colours (COLOR 1-7) or continuous colour change (CYCLE).
• The setting is saved.
9. Charging function
• Attention: The charging function only works with the power adapter. Plug the USB cable into the USB port on the alarm clock and connect the
other end to your mobile device. Make sure that the charging rate is suitable for your mobile device.
10. Care and maintenance
• Clean the device with a soft damp cloth. Do not use solvents or scouring agents.
• Unplug the device and remove the battery if you do not use it for a long period of time.
• Keep the device in a dry place.
10.1 Battery replacement
• Change the battery when the empty battery symbol appears on the display.
• Open the battery compartment. Insert a new battery (CR 2032), plus pole upwards.
• Close the battery compartment again.
• Note: If no battery is inserted, the battery symbol appears permanently on the display.
11. Troubleshooting
Problem
Solution
➜ Connect the device to the power adapter
No display
➜ Check the power adapter
➜ Press the SNOOZE/LIGHT button to activate the backlight
18
10:40 Uhr
Seite 10
MOODLIGHT – Light alarm clock with nature sounds and colour changing mood light
➜ Remove the device from the mains, remove the battery and restart after 3 seconds
Incorrect indication
➜ Check the USB port connection
No charging function
If your device fails to work despite these measures, contact the retailer where you purchased the product.
12. Waste disposal
This product has been manufactured using high-grade materials and components which can be recycled and reused.
Never dispose of empty batteries and rechargeable batteries in ordinary household waste.
As a consumer, you are required by law to take them to your retail store or to an appropriate collection site depending on national or
local regulations in order to protect the environment.
The symbols for the contained heavy metals are:
Cd = cadmium, Hg = mercury, Pb = lead
This product is labelled in accordance with the EU Waste Electrical and Electronic Equipment Directive (WEEE).
Please do not dispose of this product in ordinary household waste. As a consumer, you are required to take end-of-life devices to a
designated collection point for the disposal of electrical and electronic equipment, in order to ensure environmentally-compatible dis-
posal.
13. Specifications
Power consumption
Power supply (included)
Input: 100-240V AC 50/60Hz 0.5A Max
Output: 5.0 V DC 1.5A, 7.5W
Average active efficiency: ≥76.65%
No-load power consumption: ≤0.10 W
Back-up battery CR2032 (included)
Charging output
1x USB Port (1A)
Housing dimension
138 x 92 x 139 mm
Weight
337 g (device only)
19