TFA Dostmann MOODLIGHT Instrucciones De Uso página 8

TFA_No. 60.2023_Anleitung_05_20 20.05.2020
MOODLIGHT – Light alarm clock with nature sounds and colour changing mood light
• Do not use the device if the housing or the power adapter are damaged.
• Keep the device out of reach of persons (including children) who cannot fully appreciate the potential risks of handling electrical equipment.
• Only use the supplied power adapter.
• Connect the lead to the device first and then plug the power adapter into the socket.
• Do not pull the plug out of the socket by its cable.
• Route the mains cable so it does not come into contact with sharp-edged or hot objects.
Caution!
Risk of injury:
• Keep this device and the battery out of reach of children.
• Batteries contain harmful acids and may be hazardous if swallowed. If a battery is swallowed, this can lead to serious internal burns and death
within two hours. If you suspect a battery could have been swallowed or otherwise caught in the body, seek medical help immediately.
• Batteries must not be thrown into a fire, short-circuited, taken apart or recharged. Risk of explosion!
• Low batteries should be changed as soon as possible to prevent damage caused by leaking. Wear chemical-resistant protective gloves and safety
glasses when handling leaking batteries.
Important information on product safety!
• Do not expose the device to extreme temperatures, vibrations or shocks.
• Protect it from moisture.
• Do not apply excessive force when connecting a USB cable. The USB plug fits only one way into the USB port.
5. Elements
Display (Fig. 1)
A 1: Selection of nature sounds
A 3: Time / wake up time
A 5: Day of the week
A 7: Light alarm symbol
Buttons (Fig. 2)
B 1: SNOOZE/LIGHT sensor button*
B 3: NAP button
B 5: – button
B 7: SET button
B 9: SOUND button
B 11: TIMER button
* Important note for the use of the SNOOZE/LIGHT sensor button:
Touch the sensor button over a large area (preferably with two fingers).
14
10:40 Uhr Seite 8
A 2: Arrow to mark the selected sound
A 4: Battery symbol
A 6: Date
A 8: Sound alarm symbol
B 2: LIGHT ALARM button
B 4: ALARM button
B 6: + button
B 8: MOOD LIGHT button
B 10: COLOR MODE button
B 12: SELECT button
MOODLIGHT – Light alarm clock with nature sounds and colour changing mood light
Housing (Fig. 3)
C 1: Speaker C 2: Micro USB port
C 3: Battery compartment C 4: Power adapter jack
6. Getting started
• Connect the supplied power adapter to the alarm clock. Important! Make sure that your household voltage is no more than 240V! Otherwise your
device may be damaged.
• 0:00 and Montag 1.1 (default) appear on the display.
• The device is ready for use.
6.1 Battery
• The CR2032 button cell is a back-up battery to keep the clock operational in the event of a blackout or other power failure.
• Remove the battery insulation strip.
• Note: If no battery is inserted, the battery symbol appears permanently on the display.
7. Operation
• Press and hold the + or – button in setting mode for fast mode.
• Press the SNOOZE/LIGHT sensor button in setting mode to return to normal mode.
• The device will automatically quit the setting mode if no button is pressed for 20 seconds.
7.1 Settings
• Press and hold the SET button in normal mode for three seconds to enter the setting mode.
• DEUTSCH (default) flashes on the display.
• Press the + or – button to set the day-of-the week language in the setting mode: GERMAN - DEUTSCH, ENGLISH, SPANISH - ESPANOL and
FRENCH – FRANCAIS.
• If you select English, the display will now appear in English.
• Press the SET button again to do the settings in the following sequence: the button tone (BEEP ON - default), the 12 - or 24 hour system (FOR-
MAT 24 Hr - default), the hours, the minutes, the year, the month and the date, the month/day sequence D/M or M/D (D/M - default) and the
snooze interval (SNOOZE 15 minutes - default). Press the + or – button to adjust it.
• Confirm the setting with the SET button.
7.1.1 24- or 12-hour system setting
• Press the + or – button in setting mode to choose the 12 HR or 24 HR system.
• In the 12-HR system AM (before noon) or PM (after noon) appears on the display.
7.1.2 Snooze function setting
• You can set the snooze interval in the setting mode.
• Press the + or – button to set the desired snooze time – it adds 5 minutes at a time (5 to 120 minutes).
15