Koenic KMG 4151 B Manual De Instrucciones página 16

Size - A5
English
Remove the lid from the pusher and
Fig.
7
take out the adapter ring and sausage
muzzle.
Insert the adapter ring into the grinder
attachment on the conveyor screw
so that the nose on the meat grinder
attachment sits in the groove on the
adapter ring and so that the rounded
side faces the sausage muzzle. Now
insert the sausage muzzle into the
union nut and screw the union nut onto
the meat grinder attachment.
Connect the power plug to the mains.
Fig.
8
Slide the desired length of synthetic
or intestine sausage casing over
the sausage muzzle. Make a knot at
the beginning of the sausage cover.
Switch on the device with the ON/
OFF switch. Put the sausage meat in
the filling opening and bowl. Use the
pusher to slowly and steadily push
down the meat and make the sausages
as desired. When you have finished
your work, switch off the appliance by
pressing the ON/OFF switch again
and unplug the appliance. Clean the
device immediately as given in chapter
Cleaning and care.
Kibbeh production (G+H)
Attention
In this application, the knife and perforated
disc must be removed.
Remove the union nut and remove the
Fig.
9
grinding disc and blade.
Attention
The blade is very sharp. Be careful when
handling the blade.
16
KMG4151B-Meat Grinder_190809_V06_HR.indb 16
Remove the lid from the pusher and
Fig.
10
take out the kibbeh cone and kibbeh
nozzle.
Insert the kibbeh cone into the meat
mincer attachment on the auger so
that the nose on the meat grinder
attachment sits in the groove on the
kibbeh cone and so that the rounded
side faces the union nut. Now insert
the kibbeh nozzle into the union nut
and screw the union nut onto the meat
grinder attachment.
Connect the power plug to the mains.
Fig.
11
Switch on the device with the ON/OFF
switch. Put the raw kibbeh in the filling
opening and bowl. Use the pusher to
slowly and steadily push down the
dough and make your kibbeh as desired.
When you have finished your work,
switch off the appliance by pressing the
ON/OFF switch again and unplug the
appliance. Clean the device immediately
as given in chapter Cleaning and care.
Spritz biscuits production (I+L)
Attention
In this application, the knife and perforated
disc must be removed.
Remove the union nut and remove the
Fig.
12
grinding disc and blade.
Attention
The blade is very sharp. Be careful when
handling the blade.
12/8/2019 10:09