Charger Maintenance; Charger Mounting - McCulloch Li 402A Manual De Instrucciones

Charger Maintenance

• Keep the charger clean and clear of debris. Do not
allow foreign material into the recessed cavity or
on the contacts. Wipe with a dry cloth. Do not use
solvents, water, or place in wet conditions.
• Unplug the charger when there is no battery pack in
it.
• Fully charge the batteries before placing them in
storage.
• Store the charger at normal room temperature. Do
not store it in excessive heat. Do not use the charger
in direct sunlight. Recharge at room temperature
between 6 and 40° C.
• If the battery pack is hot, allow it to cool down before
charging.
WARNING! In order to avoid personal
!
injury and the risk of fire and electric
shock, remove the battery before
adjusting, inspecting, or cleaning the
battery.

Charger Mounting

• This charger can be installed hanging on a wall
using two screws (not supplied).
• Locate the wall mounting placement on bottom of
charger.
• If fastening to wood studs use 2 wood screws.
• Drill two holes 6 cm on center ensuring they are
level.
• If fastening to drywall use wall anchors and screws
to secure the charger to the wall.
CHARGER MAINTENANCE
CHARGER MOUNTING
IMPORTANT!
IMPORTANT SAFETY INSTRUCTIONS
SAVE THESE INSTRUCTIONS - DANGER – TO
REDUCE RISK OF FIRE OR ELECTRIC SHOCK,
CAREFULLY FOLLOW THESE INSTRUCTIONS.
Confirm the voltage in each country before using
the charger.
If the shape of the plug does not fit the power outlet,
use an attachment plug adaptor of the proper
configuration for the power outlet.
WARNING! If the battery and the
!
charger won't be used for a long time,
please remove the battery from the
charger and pull out the AC power
plug.
English - 9