Technical Specifications; Product And User Description - nedis DTCTSC10WT Manual De Uso

Technical specifications

• Radio frequency: 433.92 MHz
• Battery: 1x 9 V DC, 3x 1.5 V AA
• Alarm: > 85 db (3 m)
• Maximum number to connect: unlimited
• Maximum range: 40 metres
• Test button: yes
• Learn button: yes
• Low battery alert: yes
• Operating temperature: -10 °C ~ + 40 °C

Product and user description

1. ALARM indicator
2. TEST button
Testing the smoke alarm
Like any other electronic device, smoke alarms are not foolproof. Smoke alarms
contain electronic components that can fail or wear out at any time.
We recommended that you test the smoke alarm every week to make sure it is
working properly.
Push and hold the test button until the alarm sounds for a few seconds. The
(red) alarm indicator (1) and (green) learn indicator (4) will flash for a moment.
If the alarm does not sound, check if the battery indicator flashes once every
45 seconds. If this is not the case and testing fails, please replace the batteries
immediately.
3
ENGLISH