Sony BC-L90 Operación Manual página 25

Charging in CHARGE mode
You can charge two battery packs
simultaneously (two batteries of the same
model or two batteries of different models).
Lithium-ion battery packs
Mode select switch
CHARGE indicators
1
Set the mode select switch to
CHARGE1.
2
Connect an AC power cord (not
supplied) to the AC input connector 1
and to an AC power source 2.
3
Attach the battery packs.
Place the battery packs with their
connectors facing the charge
connectors, and slide them in the
direction indicated by the arrows.
Be sure to push the battery packs to
engage the charge connectors until
they click.
Check that the CHARGE indicators
light when charging begins. The
CHARGE indicators show the
charging status.
Flashing in orange: Charged between
0 to 80%
Flashing in green: Charged over 80%
Lit in green: Fully charged
to AC power source
AC power cord
(not supplied)
AC input
connector
Notes
• The charging current is automatically
blocked if a battery pack other than a
lithium-ion battery pack is attached. Be
sure to charge designated battery packs
only.
• Do not move or transport the charger with
the battery packs attached.
Charging Battery Packs 25