Econo Cool Operation - Mitsubishi Electric MSC-GE20VB Manual De Instrucciones

E
CONO COOL OPERATION
Press during COOL mode

ECONO COOL operation.

The unit performs swing operation vertically in various cycle according
to the temperature of the unit. Set temperature is set 2°C higher auto-
matically.
Press again to cancel ECONO COOL operation.
• Pressing also cancels ECONO COOL operation.
What is "ECONO COOL"?
Swing air fl ow (change of air fl ow) makes you feel cooler than constant air fl ow.
So, even though the set temperature is automatically set 2°C higher, it is pos-
sible to perform cooling operation with keeping comfort. As a result, energy can
be saved.
page 4 to start
Note:
• ON and OFF timers can be used in combination.
• If power failure occurs while ON/OFF timer is set, see
T
IMER OPERATION (ON/OFF TIMER)
1
Press or during operation to set the timer.
(ON timer) : The unit will turn ON at the set
time.
(OFF timer) : The unit will turn OFF at the set
time.
* or blinks.
* Make sure that the current time is set correctly.
2
Press and to set the time of timer.
Each time / is pressed, the set time increases by 1 hour/10
minutes.
Press or again to cancel timer.
of timer operations.
function"
Page 3
mark indicates the order
page 4 "Auto restart
En-6