Descargar Imprimir esta página

Bushnell ET1626 Manual De Instrucciones página 10

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

To replace the battery, remove the cap on the brightness adjustment control knob
(Fig. 1) using a coin, and insert a CR2032 battery with the "+" mark facing up (Fig. 2).
MAInTEnAnCE
Your Bushnell Elite Tactical riflescope, though amazingly tough, is a precision
instrument that deserves reasonably cautious care.
1. When cleaning the lenses, first blow away any dry dirt and dust, or use
a soft lens brush. Fingerprints and lubricants can be wiped off with lens
tissue, or a soft clean cloth, moistened with lens cleaning fluid. Microfiber
cleaning cloths are also recommended.
CAUTION: Unnecessary rubbing or use of a coarse cloth may cause
permanent damage to the lens coatings.
2. All moving parts of the scope are permanently lubricated. Do not try to
lubricate them.
3. No maintenance is needed on the scope's outer surface, except to
occasionally wipe off dirt or fingerprints with a soft cloth.
4. Use lens covers whenever it is convenient.
STORAGE
• Avoid storing the scope in hot places, such as the passenger compartment
of a vehicle on a hot day. The high temperature could adversely affect
the lubricants and sealants. A vehicle's trunk, a gun cabinet or a closet is
preferable.
• Never leave the scope where direct sunlight can enter either the objective or
the eyepiece lens. Damage may result from the concentration (burning glass
effect) of the sun's rays.
Fig. 1
9
Fig. 2

Publicidad

loading