Careful Handling And Use Of Batteries; Intended Use; Items Supplied; Technical Data - Hilti SFD 22-A Manual De Instrucciones

dust, are classified as carcinogenic, especially in conjunction with additives for treating wood (chromate,
wood preservative). Materials containing asbestos may only be handled by specialists.
▶ Take breaks between working and do physical exercises to improve the blood circulation in your fingers.
Exposure to vibration during long periods of work can lead to disorders of the blood vessels and nervous
system in the fingers, hands and wrists.
Electrical safety
▶ Before starting work, check the working area for concealed electric cables or gas and water pipes. If
you damage an electric cable accidentally, external metal parts of the power tool may become live and
present a risk of electric shock.
Careful handling and use of power tools
▶ Switch the power tool off immediately if the accessory tool jams. The power tool may go off course and
veer to the side.
▶ Wait until the power tool has come to a complete stop before setting it down.

2.3 Careful handling and use of batteries

▶ Observe the special guidelines applicable to the transport, storage and use of lithium-ion batteries.
▶ Do not expose batteries to high temperatures, direct sunlight or fire.
▶ Do not take apart, squash or incinerate batteries and do not subject them to temperatures over 80 °C.
▶ Do not attempt to charge or continue to use damaged batteries.
▶ If the battery is too hot to touch, it may be defective. In this case, place the power tool in a non-flammable
location, well away from flammable materials, where it can be kept under observation and left to cool
down. Contact Hilti Service after the battery has cooled down.
3 Description
3.1 Product overview 1
Hex socket with locking sleeve
@
Torque and drilling mode selector ring
;
Gear selector switch
=
Forward/reverse selector switch with safety
%
lock
Grip
&

3.2 Intended use

The product described is a hand-held cordless drill/driver. It is designed for driving and removing screws
and for drilling in steel, wood and plastic.
▶ Use only Hilti Li-ion batteries of the B22 series with this product.
▶ Use only the Hilti battery chargers of the C4/36 series for these batteries.

3.3 Items supplied

Drill / driver, operating instructions.

4 Technical data

4.1 Rotary hammer

Rated voltage
Weight in accordance with EPTA procedure 01
Speed in 1st gear
Speed in 2nd gear
Torque (max.)
Torque adjustment
12 English
Printed: 08.06.2017 | Doc-Nr: PUB / 5356121 / 000 / 00
Control switch (with electronic speed
(
control)
Lamp
)
Belt hook (optional)
+
Release buttons (also used to activate the
§
charge status indicator)
Charge-status and fault indicator (Li-ion
/
battery)
SFD -22A
21.6 V
1.7 kg
0 /min ... 600 /min
0 /min ... 1,800 /min
28 Nm
1.5 Nm ... 10 Nm