Waeco PerfectView M70IP Instrucciones De Montaje página 39

PerfectView M70IP
Adjusting the monitor (fig. 0, page 6)
8.4
To set the monitor to suit your requirements, proceed as follows:
➤ Press the "M" button (3) to call up the required parameters.
✓ The parameters to be set appear in the following order:
Picture:
– Brightness: 0 – 100
– Contrast: 0 – 100
– Colour: 0 – 100
– Volume: (chapter "Volume setting" on page 40)
– Automatic brightness adjustment ("Auto Dim"): ON/OFF
– Set the distance markers ("Scale adjust"): (chapter "Setting the distance markers
(fig. 0, page 6)" on page 41)
Options ("Option"):
– Language ("Lang"): English/Deutsch/Français/Español/Português/Italiano/Neder-
lands/
– Distance markers ("Scale"): ON/OFF
– Camera1/Camera2/Camera3 ("CAM1/CAM2/CAM3"): "Normal" or "Mirrored"
System:
– Video standard ("Color-Sys"): Auto/PAL/NTSC
– Screen background without the camera signal blue/black ("Blue Back"): On/OFF
– Flip horizontal ("Horizontal")
– Flip vertical ("Vertical")
– Aspect ratio ("Zoom"): 16:9 or 4:3
Auto search ("Auto Scan"):
– Automatic scan ("Auto Scan"): ON/OFF
– Scan time: 1 – 90 s
– Camera1/Camera2/Camera3 ("CAM1/CAM2/CAM3"): ON/OFF
➤ Press the "–" button (5) to reduce the value of the selected parameter.
➤ Press the "+" button (6) to increase the value of the selected parameter.
➤ Press the "M" button (2) to switch to or exit the respective menu.
➤ Press the "S" button (3) to exit the menu.
EN
(chapter "Setting the language (fig. 0, page 6)" on page 38)
Using the LCD monitor
39