Adjusting Nylon Line; Adjusting The Handles - Stihl FSE 31 Manual De Instrucciones

Adjusting Nylon Line

2
1
Hold the rotating mowing head
N
above the ground – tap it on the
ground once – about 3 cm fresh line
is advanced.
The blade (1) on the deflector (2) trims
surplus line to the correct length – avoid
tapping the mowing head more than
once at a time.
Line feed operates only if both lines still
have a minimum length of 2.5 cm.
If the nylon lines are shorter than 2.5cm,
readjust them manually – see "Manual
Adjustment of Nylin Line".
Manual Adjustment of Nylon Line
Switch off the trimmer.
N
Disconnect the plug from the wall
N
outlet.
Turn the trimmer on its back.
N
FSE 31, FSE 41
1
2
Push home the button (1) on the
N
spool as far as stop.
Pull the ends of the nylon line (2) out
N
of the spool.
If the spool is empty, see "Replacing
Nylon Line".

Adjusting the Handles

Adjusting Length of Shaft (FSE 41 only)
2
C
3
Press in the lock button (1).
N
Pull the control handle (2) upwards
N
on the shaft (3) and engage it in one
of the 3 positions: A, B or C
English
2
1
A
B
33