External audio sources
External audio sources
Front AUX-IN socket
Danger! Increased risk of injury
from connector.
In case of an accident, the protruding
connector in the front AUX-IN socket may cause
injuries. The use of straight plugs or adapters
leads to an increased risk of injury.
For this reason, we recommend using angled
jack plugs, e.g. the Blaupunkt accessories cable
(7 607 001 535).
As soon as an external audio source, such as a
portable CD/MiniDisc or MP3 player is connected
to the Front-AUX-IN socket, it can be selected with
the SRC button 6. "FRONT AUX" then appears
on the display.
Rear AUX input
Different external audio sources can be connect-
ed to the car sound system via the rear AUX input
(Rear-AUX-IN):
•
C'n'C-ready devices from the Blaupunkt ac-
cessories programme (e.g. a C'n'C-ready
Bluetooth®/USB or iPod®/USB interface;
C'n'C = Command and Control).
•
CD changer
•
Other external audio sources, such as portable
CD players, MiniDisc players, MP3 players or a
non-C'n'C-capable Blaupunkt interface.
Note:
An adapter cable is needed to connect an
external audio source via the rear AUX input.
You can obtain this cable (Blaupunkt no.:
7 607 897 093) from your Blaupunkt dealer.
Before you connect a certain device, fi rst check
the mode of the rear AUX input and, if neces-
sary, change the setting (see ch. "User settings",
section "Performing settings in the user menu",
44
"CDC" menu item). Ensure that you change the
setting only as long as no device is connected
to the rear AUX input. If necessary, remove con-
nected devices fi rst while the car sound system is
switched off.
Starting C'n'C mode
u
Press the SRC button 6 repeatedly until
the name of the device connected via C'n'C
appears on the display.
The playback starts.
Notes:
•
The C'n'C mode can be selected only if a
suitable device is connected via a C'n'C-
ready interface.
•
To operate the radio in C'n'C mode, please
read the chapter "CD/MP3/WMA/C'n'C/CD
changer mode".
•
When using suitable adapter cables, you
can connect up to 3 C'n'C-ready Blaupunkt
interfaces to the car sound system. For the
car sound system to distinguish the differ-
ent interfaces, you can assign an individual
device number to every interface (see ch.
"User settings", section "Performing set-
tings in the user menu", "C'N'C" menu
item).
Starting AUX mode
u
Press the SRC button 6 repeatedly until
"CDC / AUX" appears on the display.
The playback starts.
Note:
You can enter a separate name for the rear
AUX input that is shown on the display in
AUX mode if you selected the connected au-
dio source (see ch. "User settings", section
"Performing settings in the user menu", "AUX
EDIT" menu item).