Power Supply; Radio Operations - AXIL NR1011 Manual Del Usuario

LOCATION OF CONTROLS (AUX)
1. DISPLAY BUTTON
2. TIME ADJUST
3. ALARM 1/HOUR BUTTON
4. ALARM 2/MINUTE BUTTON
5. SLEEP BUTTON
6. SNOOZE BUTTON
7. BAND/WEEK SWITCH
8. ºC/ºF TEMPERATURE DISPLAY
9. LIGHT ON/OFF
10. TIMER
11. RADIO ON/OFF
12. TUNING CONTROL
13. VOLUME CONTROL
14. LCD DISPLAY
15. AC POWER CORD & PLUG
16. FM CABLE ANTENNA
17. BATTERY COMPARTMENT
18. SPEAKER
19. TEMPERATURE INDUCTION ANTENNA
20. AUX IN JACK

POWER SUPPLY

Check the AC current is same as the instruction show on rating label of your unit and plugs the power cord
into the AC outlet. A blinking signal will appear indicating the time.

RADIO OPERATIONS

1. Press Radio ON/OFF button once to turn on the radio. LCD displays the present radio frequency. Press
Band/Week button to select AM or FM band. Rotate the Volume control to get desired sound level and
rotate the Tuning control to get the favorite radio station. The corresponding radio frequency will be
displayed on the LCD panel.
2. About 5 seconds after the radio station is steady, LCD will change to display the time automatically.
Press Display button once to show radio frequency again.
3. Under radio working condition, the AUX IN jack can access external audio signal (eg.: MP3 headset
signal) to play the audio singal.
4. Loose the cable antenna and adjust the direction to get the best reception if the radio could not get a
clear station.
5. When radio is on, press Radio ON/OFF button once to turn off the radio.
SLEEP TO RADIO
When radio is on, press Sleep button to set your desired listening time before sleeping from 90 minutes
to 10minutes under the digression 90-80-70-60-50-40-30-20-10-00. Radio will turn off automatically
when the listening time is fi nished.