Assembly - AL-KO solo 548 K Traducción De Las Instrucciones Originales

7. ASSEMBLY

7.1 Assembly and Height Adjustment of Handle
548 K
The handle can be adjusted steplessly within its adjustment range.
Lower handle
Tube
Wires
Knob nut
1. Install the lower handle to
the machine (with 2 knob
nuts). (See Figs. 1 and 2)
2. Assemble the upper handle
to the lower handle, and
then tighten with bolts and
knob nuts.
NOTE
・ Fix wires, etc. to the handle with wire bands so that they do not
interfere opening / closing of the guard or operation of the machine.
7.2 Assembly and Height Adjustment of Handle
553 K
The handle can be adjusted steplessly within its adjustment range.
Lower handle
Wires
Nylon nuts
1. Install the lower handle to
the machine (with 4 nylon
(See Figs. 1, 2 and 3)
nuts).
2. Assemble the upper handle
to the lower handle, and
then tighten with bolts and
cap nuts.
3. Remove the housing bolts
and loosely fix the bar
temporarily. (See Figs. 4)
4. Install the fixing band to the
lower handle.
5. Catch the bar with the
hanger band and tighten it
with bolts and cap nuts.
6. Tighten the bolts of the
housing.
Upper handle
Knob nut
Wire bands
Fig. 1
handle height adjust bolt
Fig. 2
Upper handle
Tube
Cap nuts
Wire bands
Fig. 1
handle height adjust bolt
Fig. 2
Fig. 3
Handle assist bar
Fig. 4
EN
NOTE
・ Fix wires, etc. to the handle with wire bands so that they do not
interfere opening / closing of the guard or operation of the machine.
・ When adjusting the height of the handle, loosen the bolt of the
handle assist bar before loosening the handle height adjust bolt.
7.3 Attaching and Detaching of Grass Bag
CAUTION
Be sure to stop the engine. Open or Close Guard (G) slowly. Also,
do not insert your fingers in between.
(See Figs. 3, 4 and 5)
7.3.1 Assembly
1.
Lift Guard (G), and set Hook (W)
on the housing.
2.
Confirm that Grass bag (F) is
attached at the specified
position.
7.3.2 Removal
1.
Lift Guard (G), and remove
Hook (W) from the housing.
2.
Close Guard (G) slowly.
NOTE
Clogging of the grass bag
・
lowers the collecting perfor-
mance.
A wet grass bag advances
・
clogging.
a) Assembly instructions, initial adjustments and checks.
Please refer to follows.
3.6.4 Inspection and Maintenance
7. ASSEMBLY
9. INSPECTION AND MAINTENANCE
b) Transport, handling and storage of the lawnmower.
Please refer to follows.
3.6.5 Transportation by Car
9. INSPECTION AND MAINTENANCE
10. TRANSPORTATION
11. LONG-TERM STRAGE
c) Preparation of the lawnmower.
Please refer to follows.
8. OPERATION
9. INSPECTION AND MAINTENANCE
d) Information regarding the lawnmower.
Please refer to follows.
3. SAFETY
4. NAME AND FUNCTION OF EACH PART
e) The use of the lawnmower.
Please refer to follows.
3. SAFETY
8. OPERATION
9. INSPECTION AND MAINTENANCE
f) Maintenance of the lawnmower.
Please refer to follows.
3. SAFETY
8. OPERATION
9. INSPECTION AND MAINTENANCE
9
G
F
Fig. 3
W
Fig. 4
G
Fig. 5