Setting The Timer With Vcr Plus+ System - Aiwa HV-FX8100U Instrucciones De Manejo

To stop or turn the power off while
recording
Press s STOP on the remote control, Z STOP/EJECT
on the VCR or POWER.
To extend the recording duration while
recording
Press w REC/OTR until the new duration you want appears
on the screen.
Tips
• To confirm the remaining recording time on the TV screen,
press CALL during One-Touch Recording.
• You can also use the display window to check the recording
duration time and confirm the remaining recording time.
Note
When the tape reaches the end during One-Touch Recording,
" " flashes in the display window.
Setting the timer with VCR
Plus+ system
You can greatly simplify timer recordings with VCR Plus+
system. Just enter the PlusCodes, a number assigned to
each TV program, and the VCR will set the timer recording
automatically. You can find PlusCodes in most TV guide
magazines.
You can set up to 8 programs.
VCR PLUS+
Number buttons
CANCEL
ENTER
MENU
Before starting
• Check that the VCR clock is set correctly.
• Check that the VCR channel numbers match the guide
channels which are assigned to the TV stations.
• Insert a cassette with its erasure prevention tab in place.
Make sure the tape is longer than the recording time.
• Set the VCR/CATV/TV selector to VCR.
• Turn on the VCR and the TV and set the TV for VCR
reception.
• If the CATV converter is used for the timer recording,
check that the CATV converter is turned on and the
channel you want to record is selected.
1
Press VCR PLUS+.
2
Enter the PlusCode of the TV program you
want to record using the number buttons.
If you make a mistake, press CANCEL.
VCR/CATV/TV
T-REC
SET/TRACKING
+/–
CONTINUE
22
ENGLISH