Seawave Boat Rudder; User's Guide; Technical Description - Gumotex SEAWAVE Manual De Usuario

SEAWAVE boat rudder

User's Guide

Dear customer,
This guide will teach you how to install and operate the
rudder, which is available as an accessory to the infl at-
able Seawave boat. It contains a detailed description
of the whole rudder system and information about its
operation and maintenance. Please read this User's
Guide carefully before using the rudder. If you have
any trouble installing or using the rudder, contact your
dealer.
Please keep this manual in a safe place and give
it to the new owner if you sell the boat with the
rudder.

1. Technical description

1. Rudder
2. Threaded lug with nut
3. Lifting cable
4. Snap hook
5. Pedal
6. Control cable
7. Allen screw
8. Strap
9. Grip of the foot rest with slots
10. Velcro strap
11. Bracket (+ base with hexagon)
12. Washer
13. Screw
14. Pin with circlip
15. Brake
2. Instructions for installing
the rudder - see Fig. No. 1
Assembling the rudder
After removing the rudder (1) from the box, insert
the supplied threaded lugs (2) in the outer holes
and secure with nut M5 (you can use the hole for
the rudder brackets). Slide the snap hooks (4) in
the threaded lugs (2) and at the end of the lifting
cable (3).
Assembling the control system
Attach the pedals with control cables (5) to the
grips using the Allen screws (7) and the nuts M6
(use the supplied wrench for tightening).
Insert the plate with pedals, see Fig. No. 2, into
the boat, and slide the strap (8) through the slots
(9) at the bottom, instead of the footrest.
6
Index
1. Technical description
2. Instructions for installing the rudder
3. Operating the rudder
4. Disassembly of the rudder
5. Maintenance and storage
6. Warranty conditions
7. Disposal of the product
8. Disposal of the packaging
Fig. No. 1
1
2
Fig. No. 2
5
7
8
9
[GB]
Version 1/2017
3 11 12
14 4 6
6
13