Maytag Commercial W10045641B Instrucciones De Instalación página 35

ELECTRONIC CONTROL SETUP INSTRUCTIONS
Start Operating Set-up
Washer/dryers are preset at the factory and do not require any
programming. However, if you want to change the settings,
follow the "Set-Up Codes" guide.
The code at the beginning of each segment is the factory default
setting for the PD Models and is the same for the PR Models
unless noted otherwise.
The set-up code is indicated by the one or two left-hand
characters. The set-up code value is indicated by the two
or three right-hand characters.
Set-Up Codes
Code Explanation
6 07 REGULAR CYCLE PRICE (WASHER)
6 07 Represents the number of quarters (coin 1) to start
the washer; may adjust from 0–39. (See VALUE OF
COIN 1.) Advance from 0–39 by pressing the lower-
left (PERM. PRESS) button. Factory default of 7
quarters = $1.75.
6 00 PR MODELS ONLY: Factory default of 6 00,
or 0 quarters.
• Press the lower-middle (DELICATES AND KNITS)
button once to advance to next code.
REGULAR CYCLE PRICE (DRYER)
606
606 Represents the number of quarters (coin 1) needed
to start the dryer; may adjust from 0–39 (See
VALUE OF COIN 1). Advance from 0–39 by pressing
the upper-left (WHITES & COLORS) button. Factory
default of 6 quarters = $1.50.
PR MODELS: Factory default of 6 00, or 0 quarters.
600
• Press the lower-middle (DELICATES AND KNITS)
button once to advance to next code.
7 11 WASH LENGTH (WASHER)
7 11 This is the number of minutes for WASH. Washer
comes from the factory preset with 11 minutes.
Choose from 9–17 minutes by pressing the
lower-left (PERM. PRESS) button.
• Press the lower-middle (DELICATES AND KNITS)
button once to advance to next code.
REGULAR DRY TIME (DRYER)
705
705 PD MODELS: Represents the number of minutes
per quarter (coin 1).
Factory default of 5 minutes per coin.
Example: 6 quarters x 5 minutes = 30 minutes.
By pressing the upper-left (WHITES & COLORS)
button, value adjusts from 1–99 minutes.
745 PR MODELS: Represents the cycle length for free
cycles. As example: "7 45" = 45 minutes.
• Press the lower-middle (DELICATES AND KNITS)
button once to advance to next code.
Code Explanation
8 00 ADDITIONAL RINSE OPTION (WASHER)
This option is either NOT SELECTED "00" or
SELECTED "ar."
8 00 Not Selected "00."
8 Ar Selected "ar." Cannot be combined with the Super
Cycle rinse option.
• Press the lower-right (QUICK CYCLE) button
once to change this selection.
• Press the lower-middle (DELICATES AND KNITS)
button once to advance to next code.
TYPE OF DRYER PRICING (DRYER)
800
800 Fixed Cycle with Top Off. For detailed description,
see "General Washer/Dryer User Information."
8FC PR MODELS ONLY: Factory default of FC. Fixed
Cycle. For detailed description, see "General
Washer/Dryer User Information." Use the upper-
right (DELICATES) button to change this selection.
• Press the lower-middle (DELICATES AND KNITS)
button once to advance to next code.
9 00 CYCLE COUNTER OPTION
This option is either NOT SELECTED "00" or
SELECTED "0C."
9 00 Not Selected "00."
9 0C Selected "0C" and not able to be deselected.
• Press the lower-right (QUICK CYCLE) button
3 consecutive times to select "0C." Once
selected "0C" it cannot be deselected.
• Press the lower-middle (DELICATES AND KNITS)
button once to advance to next code.
If cycle counter (9 0C) is selected, the following is true:
1 00 Cycles in HUNDREDS
2 00 Cycles in ONES
This is "VIEW ONLY" and cannot be cleared.
• Press the lower-middle (DELICATES AND KNITS) button once
to advance to next code.
1 02 = 200
2 25 = 25
TOTAL CYCLES = 225
35