Panasonic CQ-C8803U Manual De Instrucciones página 31

1
Set the CS AUTO mode to off.
( page 18)
a
2
Press [VOLUME]
(PUSH SEL:
Select) to display
the AUDIO menu
display.
3
Press [VOL-
UME] (PUSH
SEL: Select) to
select a mode to
be adjusted.
4
Turn [VOLUME] clockwise or counter-
clockwise to adjust.
Note: If no operation takes place for more than 10
seconds in the audio menu (2 sec. in Main volume
adjustment), the display returns to the regular mode.
Main volume adjustment
(Setting range: 0 to 40, Default: 18)
q : Up
w : Down
Bass adjustment
(Setting range: -12 dB to +12 dB, 2 dB Step, Default:
Bass 0 dB)
q : Up
w : Down
Treble adjustment
(Setting range: -12 dB to +12 dB, 2 dB Step, Default:
Treble 0 dB)
q : Up
w : Down
Note: Do not activate SQ and Bass/Treble at same time
to avoid causing sound distortion.
Balance adjustment
(Setting range: L (left)15 to R (right) 15 and Center,
Default: Center)
q : Right enhanced
w : Left enhanced
Fader adjustment
(Setting range: R (rear) 15 to F (front) 15 and Center,
Default: Center)
q : Front enhanced
w : Rear enhanced
Subwoofer level adjustment
(Setting range : mute (-∞), -6 dB to +6 dB, 2 dB Step,
Default: 0 dB)
q : Up
w : Down
Subwoofer Low Pass Filter
(Setting range: Filter OFF, 60 Hz to 160 Hz, 5 Hz Step,
Default 120 Hz)
q : Up
w : Down
Subwoofer output range
Other speakers output ranges
High Pass Filter
(Setting range: Filter OFF, 90 Hz to 225 Hz, 5 Hz Step,
Default: Filter OFF)
q : Up
w : Down
CQ-C8803U
31