Energy Saving Tips; Using The Cooler; Connecting To A Cigarette Lighter - Dometic AS25 Instrucciones De Uso

Operation
6.1

Energy saving tips

• Choose a well ventilated location which is protected from direct sunlight.
• If you want to set an increased energy efficiency and a limited cooling capacity for
the cooler device, use the device's ECO mode.
• Allow warm food to cool down first before placing it in the cooling device to
keep cool.
• Do not open the cooling device more often than necessary.
• Do not leave the cooling device open for longer than necessary.
6.2

Using the cooler

➤ Place the cooler on a firm base.
➤ Connect the 12 V connection cable (fig. 2 1, page 3) into the cigarette lighter
socket or a 12 V socket in the vehicle.
➤ Plug the 230 V connection cable (fig. 2 2, page 3) into the AC voltage socket
and connect it to the 230 Vw mains supply.
I
NOTE
Close the box tightly by pushing down the lid.
✓ The cooler starts cooling the interior.
➤ When operating at the AC mains supply: Push the ECO cooling capacity
control (fig. 1 2, page 3) to the desired position.
➤ To switch off the cooler, disconnect the plug.
6.3

Connecting to a cigarette lighter

I
NOTE
If you connect the device to the cigarette lighter of your vehicle,
remember that the ignition must be turned on to supply the device with
power.
12
BordBar AS25
EN