When The Work Is Done; Changing The Dust Bag - Bosch BSG6 Instrucciones De Uso

de en
Vacuuming
10
Figure
Adjusting the floor tool:
Rugs and carpets =>
Hard surfaces
11*
Figure
Adjust the "autofloor" floor tool:
Hard floor setting
Fixed position for vacuuming hard
floors/ parquet
Automatic setting
The nozzle adjusts automatically to the floor
covering and switches from hard floors/
parquet to carpeted floors
Carpet setting
Fixed position for vacuuming rugs
and carpets
If you are vacuuming varying types of floor
coverings (hard floors <-> carpets), we
recommend that you use the automatic
setting so that the nozzle adjusts
automatically to the floor and you do not
need to switch over the nozzle setting.
12
Figure
Remove the upholstery nozzle and crevice
nozzle from the accessories holder as
illustrated.
13*
Figure
Vacuuming with accessories
Attach the nozzles to the suction pipe or
handle as required:
a) Crevice nozzle for vacuuming crevices and
corners, etc.
b) Upholstery nozzle for vacuuming upholstered
furniture, curtains, etc.
c) Hard furnishings brush
For cleaning window frames, cabinets,
mouldings, etc.
d) Hard-floor brush
For vacuuming hard floor coverings (tiles,
parquet flooring, etc.)
10
=>
=>
=> auto
=>
14
Figure
After use, push the crevice nozzle and
upholstery nozzle back into the accessories
holder as indicated.
Turbo brush
If your vacuum cleaner is equipped with a turbo
brush, please consult the accompanying
instruction manual for notes on use and
maintenance.
15
Figure
When stopping cleaning for a moment, you
can use the parking aid on the back of the
vacuum cleaner.
Once you have switched off the vacuum
cleaner, slide the catch on the floor tool into
the groove on the rear of the appliance.
16
Figure
The appliance can also be carried using one
of the two handles when vacuuming steps,
for example.

When the work is done

17
Figure
Unplug the vacuum cleaner.
Tug the power cord briefly and let go.
The cable then rewinds automatically.
18
Figure
To store or transport the vacuum cleaner, use
the storage aid on the underside of the
vacuum cleaner.
Stand the vacuum cleaner up on its end.
Slide the catch on the floor tool into the
groove on the underside of the appliance.

Changing the dust bag

Replacing the dust bag
19*
Figure
a) If the dust bag change indicator is completely
yellow when the floor tool is lifted from the
floor and the highest suction power is
selected, the dust bag must be changed. In
this case it is essential to change the dust
bag due to the type of material it contains.