8- Voltage Detection By Inductance - Steren MUL-288 Manual De Instrucciones

8. Voltage detection by inductance
This function detects voltage without measure under the principle of
self-inductance
1. Turn on the meter. The position of the knob not matter, since this
function is not detection or measurement.
2. Lift the sensor from the top to the equipment or component to check for
electricity (cables, contacts, sockets, etc.) part.
The indicator lights when detecting more than 110 V (rms) voltage.
Even if the LED does not light, there may be voltage; do not trust in the
voltage detector to determine the presence of electricityin one cable.
Sensing operation is subject to several factors, including the
thickness and type of insulation.
If the terminal detects voltage, it is possible that the LED lights.
Keep the meter away from sources of electrical noise during testing,
because they can give false readings.
15 15