Voltage Commutation; Operation; Cleaning And Care - Unold 87025 Manual De Instrucciones

Voltage commutatIon

Before connecting
the appliance please
check if the voltage
selector is adjusted
to the right voltage
(120/230-240 V~). To
change the selection a
coin may be used.

oPeratIon

1. Remove all packaging materials and any
transport safety devices. Keep packaging
material out of reach of children. Danger of
suffocation!
2. After washing your hair, dry it thoroughly
with a towel.
3. Unfold the appliance until the handle
latches into place.
4. Using the switch installed on the handle,
the appliance can be switched from 120 V~
to 230-240 V~. Before connecting the
appliance, please check the local voltage
and adjust the appliance to the right voltage
using a coin or something similar.
5. Connect the plug to a wall socket.
6. Switch the appliance on using the blower
setting switch and select the desired blower
and heat settings. The following settings
may be selected:
0 = off
1 = smooth air stream and heat setting
for drying and styling
2 = strong air stream and heat setting for
quick drying
 = cool air setting to fix styling

cleanIng anD care

1. Unplug the appliance from the wall socket.
2. Let the appliance cool off.
3. Never immerse the appliance or the lead
cable in water or other liquids to clean them.
4. Clean the appliance with a dry cloth.
5. Do not use any scrubbing sponges, abrasive
agents, steel wool, metal objects, disinfec-
12
7. The cool shot serves to stabilise the styling
and give more body.
8. If desired, following accessories may be
used:
concentrator
The concentrator allows for drying hair parts
individually and precisely.
After use the concentrator can be simply
detached from the appliance. In order to
avoid burns it is nevertheless recommended
to wait until the appliance and the
attachments have cooled off.
9. After drying your hair, always switch the
appliance off using the EIN/AUS [ON/OFF]
switch before disconnecting the plug from
the wall socket.
10. For space saving storage and transport, fold
the appliance.
attention: the appliance becomes very
hot during operation and maintains
the heat during some time after
disconnection.
tants or hot cleaning agents, since they can
damage the appliance.
6. The concentrators can be rinsed with water,
if necessary. The concentrator must be
completely dry before using it again.