Publicidad
Idiomas disponibles
Idiomas disponibles
F5 - CLEANING THE DRUM
•
Check the amount of debris vacuumed particularly if used for voluminous ma-
terials.
•
We recommend emptying the drum when it is half full.
•
After using the appliance as a wet vacuum, empty the drum and dry it and the
attachments to prevent caking.
Cleaning the detergent mixture filter and the spray-suction tool
(Fig. "F9"- "F10")
•
After washing check that the filter (f) situated on the detergent solution suction
hose is not blocked; if it is, remove it and flush with running water (fig. "F9").
•
If dirt is deposited inside the spray extraction nozzle (r), remove the transparent
part on the top (t) to clean it (fig. "F10").
F6 - REPLACING THE POWER CORD
•
Contact an authorised service centre (see list attached) if the power cord has
been damaged, since special tools are needed to replace it.
"EC" DECLARATION OF CONFORMITY
vacuum cleaners for extraction cleaning of surfaces and upholstery
in conformity with the following European Directives:
and furthermore are manufactured in conformity with the following standards
EN 60335-1:2002 + A1:2004 + A2:2006 + A11:2004 + A12:2006 + A13:2008
EN 61000-3-2:2006 + A1:2009 + A2:2009
The manufacturer declares that
the vacuum cleaners/liquid
Models:
- Lavamatic
- Lavamatic TI
are standard products and
2004/108/EC 2006/95/EC
or standardised documents:
EN 60335-2-2:2003 + A2:2006
EN 62233: 2008
EN 55014-1:2006 + A1:2009
EN 55014-2:1997 + A1:2001 + A2:2008
EN 61000-3-3:2008
This declaration was drawn up in March 2011
Type GSW 5
Type GSW 5
EN
25
Publicidad
