Chemical And Biological Safety; Product Overview - Hach AS1000 Serie Manual Del Usuario

Chemical and Biological Safety

Chemical or biological hazards. If this instrument is used to monitor a treatment process and/or
chemical feed system for which there are regulatory limits and monitoring requirements related to
public health, public safety, food or beverage manufacture or processing, it is the responsibility of the
user of this instrument to know and abide by any applicable regulation and to have sufficient and
appropriate mechanisms in place for compliance with applicable regulations in the event of malfunction
of the instrument.
Never use this instrument to do tests on living beings.
Normal operation of this device may require the use of chemicals or biological samples.
• Do not use the instrument in samples that could cause a biological hazard.
• Observe all cautionary information printed on the original solution containers and safety data
sheets prior to their use.
• Dispose of all consumed solutions in accordance with the local and national regulations and laws.
• Select the type of protective equipment suitable to the concentration and quantity of the dangerous
material being used.

Product overview

The TitraLab AS1000 series is an automatic sample changer used in analytical laboratories with the
TitraLab AT1000 series analyzers. There are three sampler models:
• AS1000.XX.20090: Sampler for TitraLab AT1000 series, 20 beakers, 90 mL
• AS1000.XX.30050: Sampler for TitraLab AT1000 series, 30 beakers, 50 mL
• AS1000.XX.12150: Sampler for TitraLab AT1000 series, 12 beakers, 50/150 mL
The sampler is PC-controlled with the TM1000 software. The instrument has a tray that holds the
sample beakers. Refer to
change the sample position while the lifting module moves sensors and tubes up and down into each
sample. The sampler has an integrated magnetic stirrer. Use the sampler for a wide variety of
aqueous sample applications. Refer to the analyzer and software documentation for more
information. Refer to Figure
Note: The type of tray, probe holder and beakers is dependent on the model. Refer to
6 English
D A N G E R
N O T I C E
Table 1 for instrument configurations. The rotating module turns the tray to
1.
Table 1.