Sunrise Medical Zippie IRIS Manual De Instrucciones página 21

E N G L I S H
6. Axle Position Adjustment
IMPORTANT NOTE– The adjustment on each side of the chair should be exactly equal.
IMPORTANT NOTE– Do not attempt to make this adjustment. This adjustment must be done by an
authorized supplier only.
NOTE– Use a torque setting of 120 in.-lbs. When setting-up the axle plate.
7. Axle Height Adjustment
IMPORTANT NOTE– The adjustment on each side of the chair should be exactly equal.
IMPORTANT NOTE– Do not attempt to make this adjustment. This adjustment must be done by an
authorized supplier only.
NOTE– Use a torque setting of 120 in.-lbs. When setting-up the axle plate.
NOTE– The frame must be kept horizontal when height adjustments are made. Refer to matrix in the order-
ing guide for proper setting.
39 40
T. CARRIAGE
IMPORTANT NOTE– Do not attempt to make this adjustment. This adjustment must be done by an
authorized supplier only.
39
1. Adjustment
IMPORTANT NOTE– The adjustment on each side of the chair should be exactly equal.
NOTE– Use a torque setting of 120 in.-lbs. When setting-up carriage.
2. Range and setting– 55°
3. Range and setting– 40°
4. Top Roller Replacement
NOTE– It is highly recommended to replace both top rollers within each carriage assembly at the same time.
Do not use lubricants anywhere on the assembly.
38
38
40
40
41
21
IX. SET-UP & ADJUSTMENT
38
H
G
39
A
B
40
C
E
F
D
O
K
41
N
L
P
Q
R
M