Steren MIX-150 Manual De Instrucciones página 16

1. USB PORT
This type of port is used as an interface between the mixer and a computer. It can also be used as a
power source to an electrical outlet.
2. MAIN SWITCH
Turns on / off the unit .
3.TURN ON LED INDICATOR
Will illuminates when the device is power on.
4. MIC / LINE INPUT
Insert an XLR cable (cannon) or 6.3 mm cable with monaural signal. To avoid damage, DO NOT
connect any signal when the unit is on.
5. LINE INPUT
RCA connectors for stereo signal.
6. AUXILIARY INPUT
Correa
Connect an RCA cable into an MP3 device, CD player, tablet or computer.
7. AUXILIARY OUTPUT
Connect an RCA cable into a (CD Recorder).
8. MAIN OUTPUT
Use a 3.5 mm cable to connect an amplifier or an active speakers.
9. MONITOR OUTPUT
Use a 3.5 mm cable to connect an amplifier, an active speaker box or headphones.
10. GAIN CONTROL
Adjusts the amount of input signal.
11. TREBLE CONTROL
Adjusts high frequencies.
12. BASS CONTROL
Set low frequencies.
3