Usage Conditions; Work Area; Personal Safety - ENAR VOLGA MX-510-1305 Manual De Instrucciones

3

USAGE CONDITIONS

WARNING!

3.1 WORK AREA

KEEP your work area clean and well lit. Cluttered benches and dark areas invite accidents.
DO NOT OPERATE power tools in explosive atmospheres, such as in the presence of flammable
liquids, gases, or dust. Power tools create sparks which may ignite the dust or fumes.
KEEP bystanders, children, and visitors away while operating a power tool. Distractions can cause
you to lose control.

3.2 PERSONAL SAFETY

STAY ALERT, watch what you are doing and use common sense when operating a power tool.
DO NOT USE TOOL while tired or under the influence of drugs, alcohol, or medication. A moment of
inattention while operating power tools may result in serious personal injury.
DRESS PROPERLY.
DO NOT WEAR loose clothing or jewellery.
CONTAIN long hair.
KEEP your hair, clothing, and gloves away from moving parts. Loose clothes, jewellery, or long hair
can be caught in moving parts.
AVOID accidental starting.
REMOVE adjusting keys or switches before turning the tool on. A wrench or a key that is left
attached to a rotating part of the tool may result in personal injury.
en
DO NOT overreach.
KEEP proper footing and balance at all times. Proper footing and balance enables better control of
the tool in unexpected situations.
USE safety equipment.
Always WEAR eye protection. Dust mask, non-skid safety shoes, hard hat, or hearing protection
must be used for appropriate conditions.
3.3 TOOL USE AND CARE
DO NOT FORCE tool.
USE the correct tool for your application. The correct tool will do the job better and safer at the rate
for which it is designed.
DO NOT USE tool if switch does not turn it on or off. Any tool that cannot be controlled with the
switch is dangerous and must be repaired.
STORE idle tools out of reach of children and other untrained persons. Tools are dangerous in the
hands of untrained users.
MAINTAIN tool with care. Properly maintained tools,are less likely to bind and are easier to control.
CHECK for misalignment or binding of moving parts, breakage of parts, and any other condition that
may affect the tools operation. If damaged, have the tool serviced before using. Many accidents are
caused by poorly maintained tools.
USE only accessories that are recommended by the manufacturer for your model. Accessories that
may be suitable for one tool, may become hazardous when used on another tool.
3.4 SERVICE
Tool service MUST BE PERFORMED only by qualified repair personnel.
When servicing a tool, USE only identical replacement parts.
FOLLOW instructions in the Maintenance section of this manual.
4
Read and understand all instructions.
PUMP UNIT 3" + FLEXIBLE SHAFT 6m VOLGA
VOLGA IMMERSION PUMPS